Dante AV Decoder (D Series)
- D10H$1895 MSRP
- D20S$2195 MSRP
Overview
The Bolin D10H(HDMI) / D20S(12G-SDI) Dante AV Decoder is AVoIP Decoder that is part of Bolin DanteAV camera system. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0 and/or 12G-SDI, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.
It transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality. It supports HDCP, plus IP PTZ camera control and embedded audio and RS-RS422/IR control pass-through.
As part of Dante Audio over IP eco family, using standard Gigabit Ethernet network switches and CAT5e UTP wiring, D Series decoder delivers a high-performance virtual video matrix routing solution for presentation of multimedia, and live camera images, Dante 4k video content application such as demanding conference room and classroom applications.
-
Powered By DanteAV™ Module
■ Pair with Bolin D412/D220 DanteAV PTZ camera, Powered by DanteAV™ module, D Series Dante AV Decoder video output achieves lossless video and extremely low latency with video and audio synchronization.
■ Designed to seamlessly integrate into an existing Dante audio ecosystem, the D Series decoder is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues. More information about Dante AV■ Pair with Bolin D412/D220 DanteAV PTZ camera, Powered by DanteAV™ module, D Series Dante AV Decoder video output achieves lossless video and extremely low latency with video and audio synchronization.
■ Designed to seamlessly integrate into an existing Dante audio ecosystem, the D Series decoder is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues. More information about Dante AV -
Dante Ecosystem Friendly
■D10H Dante AVoIP decoder instant compatibility with over 2000 existing Dante-enabled products.
■ Unified control of camera audio and video using familiar tools - Dante Controller.
■ No need to replace network infrastructure. Dante AV works with already installed, cost-effective 1Gbps network gear.
■ Uses Dante Controller and endpoints so you can easily click to check video and audio control routing.
■D10H Dante AVoIP decoder instant compatibility with over 2000 existing Dante-enabled products.
■ Unified control of camera audio and video using familiar tools - Dante Controller.
■ No need to replace network infrastructure. Dante AV works with already installed, cost-effective 1Gbps network gear.
■ Uses Dante Controller and endpoints so you can easily click to check video and audio control routing.
-
intoPIX’s JPEG 2000 enables Dante AV to:
■ Create 4K multi-screen environments, allowing audio to be routed wherever desired
■ Deliver perfect lip-sync during live presentations with video thanks to ultra-low latency
■ Easily deploy and manage video walls at lower cost thanks to the utilization of Cat 5e cables and switchers
■ Simplify installation and use of conference rooms that combine video and audio media.
Quoted from www.intopix.com■ Create 4K multi-screen environments, allowing audio to be routed wherever desired
■ Deliver perfect lip-sync during live presentations with video thanks to ultra-low latency
■ Easily deploy and manage video walls at lower cost thanks to the utilization of Cat 5e cables and switchers
■ Simplify installation and use of conference rooms that combine video and audio media.
Quoted from www.intopix.com -
Lossless image with extremely low codec latency
■ Bolin’s D Series decoder, it transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality.
■ D Series decoder incorporates an optimized implementation of the popular JPEG2000 codec in FPGA, which delivers visually perfect lossless image at 4K60 with < 10ms codec latency.■ Bolin’s D Series decoder, it transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality.
■ D Series decoder incorporates an optimized implementation of the popular JPEG2000 codec in FPGA, which delivers visually perfect lossless image at 4K60 with < 10ms codec latency. -
100% Synchronized video and audio
D Series DanteAV decoder integrated Dante’s sub-microsecond synchronization to video and audio, a Dante single network clock keeps the camera video in sync regardless of the number of endpoints, making Lip-Sync problem a thing of the past.
D Series DanteAV decoder integrated Dante’s sub-microsecond synchronization to video and audio, a Dante single network clock keeps the camera video in sync regardless of the number of endpoints, making Lip-Sync problem a thing of the past.
-
HDMI output EDID supported
The D10H provides decoded image to output via HDMI 2.0 which supports EDID. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
The D10H provides decoded image to output via HDMI 2.0 which supports EDID. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
-
Remote Control & Monitoring
The D Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial Over IP control running Visca protocol. Also has IR over IP to control connected display or other devices.
The D Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial Over IP control running Visca protocol. Also has IR over IP to control connected display or other devices.
Key Features
Features
- DanteAV Decoder Pair With Bolin D412/D220 DanteAV PTZ CameraPair with Bolin D412/D220 DanteAV PTZ camera, or use it as standard DanteAV decoder, D Series decoder integrates into Dante Audio over IP platform using a standard 1 Gbps network. With a rich set of Dante control interfaces, support for Dante Device Protocol, packet bridging, AES67, plus video and HDCP encryption, professional onboard scaling, D10 can seamlessly connect a DanteAV product with networked control to the growing ecosystem of both Dante AV and Dante Audio-enabled products.
- Multi-screen Video Display RoutingDante AV Decoder, it receives the signal from a DanteAV PTZ camera or an encoder and feeds it to a display device via the HDMI and/or 12G-SDI output. Using familiar Dante Controller software, the decoder can quickly and easily switch between multiple DanteAV endpoints including cameras or encoders on the network, with no need for breakouts or matrix switches to display the video on any number of screens, and provide the video for video router system to use.
- Implementation of HDCP 2.2 EncryptionAdheres to the latest HDCP 2.2 specification for High-bandwidth Digital Content Protection. Allows protected content streams to pass between authenticated devices.
- Dante Controller SupportedFull setup and control and monitoring of the device is enabled through Dante Controller that delivers standard Dante features such as automatic device discovery and system configuration, making network setup a simple plug and play experience.
- Always Up To DateFirmware updates, upgrade via Dante Controller IP interface to keep the decoder features and performance up to date.
- Audio Formats, Dante Audio over IP, AES67 RTPThe D Series Dante AV Decoder supports industry-standard AES67- compatible networked audio streams from encoders and audio interfaces. The received Dante audio streaming or AES67 audio stream can be combined with the video and then output via the HDMI output.
- Two Ethernet Ports and POEThe D Series Dante AV Decoder includes two RJ-45 1000BASE-T ports can be used to transport video over a Gigabit Ethernet network. Ports 1 for Dante network primary connection and Port 2 can be used to daisy-chain other endpoints. Port 1 is also capable of receiving power.
- D Series decoder has two models: ■ D10H has HDMI output only, which provides decoded image to output via HDMI 2.0. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
■ D20S has HDMI and SDI output, which has SDI video processor built-in to convert Dante AV decoded HDMI to SDI (Up to 12G-SDI) signal for ProAV and broadcast video work flow applications. - USB HID and USB OTGUSB control over IP that can be switched and routed alongside the AV signal or separately via a control system allows you to use a USB mouse and/or keyboard to control a remote computer via the Dante network. USB On The Go (OTG) for keyboard and mouse
Illustration
Power switch
LED: Power. Green-Board Powered and Active
LED: Codec. Green-Video Codec Active
LED: System status: Green-All OK and Synched; Red-Boot Failure; Amber: Awaiting Sync
LED: Error. Green-Software running; Blinking Green- Identify command activated; Red/Blinking Red-Software fault;
LED: SYNC. Green-Dante Clock Slave, synched; Blinking Green-Dante Clock Master; Red-Error achieving Sync; Amber-Sync in progress
LED: HDCP. Green-non HDCP video; Blinking Green-HDCP protected video content; Red-Invalid non- HDCP content; Blinking Red-Failed HDCP negotiation; Blinking Amber-HDCP negotiation in progress
Serial port RS422 for PTZ camera control. RJ45
IR RX connector; 2-pin 3.5 mm
IR TX connector; 2-pin 3.5 mm
USB OTG; Host computer Mouse (Only transmitter, not activated)
USB 2.0, use for keyboard
USB 2.0, use for mouse
Ethernet 2: 1000BASE-T Ethernet port
Ethernet 1: 1000BASE-T Ethernet port; IEEE 802.3bt Type 3, PoE++ Class 4
DC power input (48V DC IN), 2.1 mm Barrel Plug
HDMI cable secure mount
12G-SDI output
HDMI cable secure mount
HDMI 2.0 output
Ethernet 2: 1000BASE-T Ethernet port
Ethernet 1: 1000BASE-T Ethernet port; IEEE 802.3bt Type 3, PoE++ Class 4
Specifications
| Video Codec | Optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX |
| Video Resolutions | Up to 4096x2160@60Hz; RGB 4:4:4 @ 8 bit YCbCr 4:4:4 @ 8 bit YCbCr 4:2:2 @ 8/10/12 bit |
| Color Depth | 8-bit, 10-bit, 12-bit |
| Audio Formats | Dante Audio over IP |
| Bit Rates | 200 to 800 Mbps |
| Copy Protection | HDCP 2.2, HDCP 2.3 for network, |
| Latency | 0.5 frame (e.g. 2160p @ 60 Hz latency is < 8 ms between encoder and decoder), Note: Overall latency may increase depending on network configurations |
| Dante Ecosystem Friendly | Instant Dante Ecosystem compatibility with existing Dante-enabled products; Unified control of audio and video using Dante tools - Dante Controller |
| Format | HDMI 2.0: HDCP 2.2, EDID |
| Supported resolutions | 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480 |
| Frame rates (Hz) | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 |
| Colour space | RGB, YCbCr |
| Component bit width | 8-bit, 10-bit, 12-bit |
| Colour sub-sampling | 4:4:4, 4:2:2, 4:2:0 |
| EDID | YES, Only with D10H |
| Available | Only D20S |
| Format | 12G-SDI |
| Supported resolutions | 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480 |
| Frame rates (Hz) | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 |
| Colour space | YCbCr |
| Component bit width | 10-bit |
| Colour sub-sampling | 4:2:2, 4:2:0 |
| Standard | SMPTE 292(1.5Gb/s), SMPTE 424, SMPTE 425-A(3Gb/s), SMPTE 2081, SMPTE 2082 With SMPTE352 SDI Metadata Supported |
| Audio transport formats | Up to eight channels at 44.1, 48, 88.2 or 96kHz. HDCP sourced audio channels limited to 48kHz. HDMI 7.1 embedded audio. |
| Bit depths | 24, 16 and 32 bits per audio sample |
| Embedded audio over HDMI output | 2 channels from DANTE |
| Output sample rate | 48K and 96K, PCM24(24, 16 and 32 bits) |
| ETHERNET 1 POE | IEEE 802.3ab compliant 1000BASE-T Ethernet port, IEEE 802.3bt Type 3 compliant, PoE++ Class 4 (60W) |
| ETHERNET 2 | IEEE 802.3ab compliant 1000BASE-T Ethernet port |
| HDMI OUTPUT | HDMI Type A connector, female; HDMI digital video/audio output |
| SDI OUTPUT (D20S) | BNC, 75Ω, |
| USB 1, USB 2 | USB Type-A connector, female; USB 2.0 host port; USB signal extender port for connection to a mouse, keyboard; Available Power: 500 mA at 5 VDC. |
| USB OTG (On The Go) | Host computer Mouse (Dante AV transmitter) |
| Serial Control | RJ45, RS-422 compatible with Visca control PTZ camera |
| IR TX, IR RX | 2-pin 3.5 mm, Carrier frequency:38 kHz; Supply voltage: 3.3V to 5V. |
| LED Indicator | Power, Codec, System, Error, Sync, HDCP |
| Network Interface | Standard 1Gbps Ethernet |
| Audio Channels x8,Flow x15 (unicast or multicast) | |
| Video Flow x1 (unicast or multicast) | |
| Hardware time-stamping, supporting sample-accurate playback |
| Power Consumption | Power input @ 4K60: 38W (D20S); 25W (D10H) |
| PoE (D10H) | PoE+, IEEE 802.3at Type 3 class 5 compliant |
| PoE (D20S) | PoE++, IEEE 802.3bt Type 3 class 5 compliant |
| Power Adaptor | Input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz, Output: 4A @ 12 VDC. 12V DC IN has priority over Ethernet 1 POE. Ethernet 1 POE will become active a fraction of a second after 12V DC IN is disconnected. |
| Storage Temperature | -40 to 100℃ |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% (non-condensing) |
| Heat Dissipation | Cooling fan speed adjustable, 3 Level |
| Acoustic Noise | NC35 or less, variable with cooling fan speed adjustment |
| Regulatory compliance | CE, IC, FCC Part 15 Class B digital device |
| Body Color | Metallic Black |
| Mounting (Included) | HDMI cable secure mount, surface mount for TV display, base mount. |
| Mounting (Optional) | 19 inch single rack mount, 19 inch dual rack mount, Din rail mount |
| Dimension | 216.5x148.35x44mm (LxWxH) |
| Weight | 2.5 lb (1.3 kg)(Net weight) |
CompareCompare More Products
Check mark to compare different models or go to Compare Center to have more product comparison.
- Maximum 4 compare products at once, please reselect.
- Maximum 4 compare products at once, please reselect.
ResourcesGo to Help & Download Center
Download product Datasheet and User Guide, click Go to Help & Download Center for more product information.
Dante AV D Series D10H Decoder Product Information
Documentation
D Series Dante AV Decoder Installation Information
Documentation
KBD-1010 PTZ Keyboard Controller Product Information
Order Information
Use Order Information for ordering cameras and accessories.
| Item Number | SKU | Key Spec | Note |
|---|---|---|---|
| A101E001 | D10H | HDMI 2.0 Output | Body |
| A101E002 | D20S | HDMI 2.0 and 12G-SDI Output | Body |
| L3030029 | B-RM11 | Dual Rack Mount Kit | Accessory, Optional |
| L3030030 | B-RM10 | Single Rack Mount Kit | Accessory, Optional |
| L3030031 | B-DR10 | Din Rail Mount Kit | Accessory, Optional |
| B102E001 | BL-PP97 | 97W High Power POE Power Supply Unit | Accessory, Optional |
| L7030010 | VCC-CC8MDP | RS232 8-Pin Mini Din to Phoenix Adapter | Accessory, Optional |
| L9190003 | VCC-RC-2 | IR Remote Controller | Accessory, Optional |
| L9060003 | VCC-P12-4 | 12VDC 4A Power Adapter | What's included, X1 |
| L7030005 | VCC-CC45RS | RS422/232 RJ45 Adapter | What's included, X1 |
| L3030032 | B-SM10 | Surface Mount Kit | What's included, X1 |
| L3030033 | B-BM10 | Base Mount kit | What's included, X1 |
| Thank you Card | What's included, X1 |
