D Series DanteAV Decoder

  • D10H$1895 US MSRP$1749 EU MSRP
  • D20S$2195 US MSRP$1999 EU MSRP

Overview

The Bolin D10H(HDMI) / D20S(12G-SDI) decoder is part of Bolin DanteAV camera system. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0 and/or 12G-SDI, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.

It transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality. It supports HDCP, plus IP PTZ camera control and embedded audio and RS-RS422/IR control pass-through.

As part of Dante Audio over IP eco family, using standard Gigabit Ethernet network switches and CAT5e UTP wiring, D Series decoder delivers a high-performance virtual video matrix routing solution for presentation of multimedia, and live camera images, Dante 4k video content application such as demanding conference room and classroom applications.

    Key Features

  • DanteAV Module Imbedded Decoder

    Powered By DanteAV™ Module

    ■ Pair with Bolin D412/D220 DanteAV PTZ camera, Powered by DanteAV™ module, D Series decoder video output achieves lossless video and extremely low latency with video and audio synchronization.
    ■ Designed to seamlessly integrate into an existing Dante audio ecosystem, the D Series decoder is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues.

    ■ Pair with Bolin D412/D220 DanteAV PTZ camera, Powered by DanteAV™ module, D Series decoder video output achieves lossless video and extremely low latency with video and audio synchronization.
    ■ Designed to seamlessly integrate into an existing Dante audio ecosystem, the D Series decoder is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues.

  • D10H Decoder system layout drawing-1200

    Dante Ecosystem Friendly

    ■ Instant compatibility with over 2000 existing Dante-enabled products.
    ■ Unified control of camera audio and video using familiar tools - Dante Controller.
    ■ No need to replace network infrastructure. Dante AV works with already installed, cost-effective 1Gbps network gear.
    ■ Uses Dante Controller and endpoints so you can easily click to check video and audio control routing.

    ■ Instant compatibility with over 2000 existing Dante-enabled products.
    ■ Unified control of camera audio and video using familiar tools - Dante Controller.
    ■ No need to replace network infrastructure. Dante AV works with already installed, cost-effective 1Gbps network gear.
    ■ Uses Dante Controller and endpoints so you can easily click to check video and audio control routing.

  • IntoPIX JPEG2000

    intoPIX’s JPEG 2000 enables Dante AV to:

    ■ Create 4K multi-screen environments, allowing audio to be routed wherever desired
    ■ Deliver perfect lip-sync during live presentations with video thanks to ultra-low latency
    ■ Easily deploy and manage video walls at lower cost thanks to the utilization of Cat 5e cables and switchers
    ■ Simplify installation and use of conference rooms that combine video and audio media.
    Quoted from www.intopix.com

    ■ Create 4K multi-screen environments, allowing audio to be routed wherever desired
    ■ Deliver perfect lip-sync during live presentations with video thanks to ultra-low latency
    ■ Easily deploy and manage video walls at lower cost thanks to the utilization of Cat 5e cables and switchers
    ■ Simplify installation and use of conference rooms that combine video and audio media.
    Quoted from www.intopix.com

  • Video Latency Test 1080p60-1600

    Lossless image with extremely low codec latency

    ■ Bolin’s D Series decoder, it transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality.
    ■ D Series decoder incorporates an optimized implementation of the popular JPEG2000 codec in FPGA, which delivers visually perfect lossless image at 4K60 with < 10ms codec latency.

    ■ Bolin’s D Series decoder, it transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality.
    ■ D Series decoder incorporates an optimized implementation of the popular JPEG2000 codec in FPGA, which delivers visually perfect lossless image at 4K60 with < 10ms codec latency.

  • DanteAV 100% AV SYNC

    100% Synchronized video and audio

    D Series DanteAV decoder integrated Dante’s sub-microsecond synchronization to video and audio, a Dante single network clock keeps the camera video in sync regardless of the number of endpoints, making Lip-Sync problem a thing of the past.

    D Series DanteAV decoder integrated Dante’s sub-microsecond synchronization to video and audio, a Dante single network clock keeps the camera video in sync regardless of the number of endpoints, making Lip-Sync problem a thing of the past.

  • DanteAV Decoder HDMI EDID-1

    HDMI output EDID supported

    The D10H provides decoded image to output via HDMI 2.0 which supports EDID. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.

    The D10H provides decoded image to output via HDMI 2.0 which supports EDID. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.

  • DanteAV PTZ Camera Decoder Control

    Remote Control & Monitoring

    The D Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial Over IP control running Visca protocol. Also has IR over IP to control connected display or other devices.

    The D Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial Over IP control running Visca protocol. Also has IR over IP to control connected display or other devices.

Features

  • DanteAV Decoder Pair With Bolin D412/D220 DanteAV PTZ CameraPair with Bolin D412/D220 DanteAV PTZ camera, or use it as standard DanteAV decoder, D Series decoder integrates into Dante Audio over IP platform using a standard 1 Gbps network. With a rich set of Dante control interfaces, support for Dante Device Protocol, packet bridging, AES67, plus video and HDCP encryption, professional onboard scaling, D10 can seamlessly connect a DanteAV product with networked control to the growing ecosystem of both Dante AV and Dante Audio-enabled products.
  • Multi-screen Video Display RoutingAs a decoder, it receives the signal from a DanteAV PTZ camera or an encoder and feeds it to a display device via the HDMI and/or 12G-SDI output. Using familiar Dante Controller software, the decoder can quickly and easily switch between multiple DanteAV endpoints including cameras or encoders on the network, with no need for breakouts or matrix switches to display the video on any number of screens, and provide the video for video router system to use.
  • Implementation of HDCP 2.2 EncryptionAdheres to the latest HDCP 2.2 specification for High-bandwidth Digital Content Protection. Allows protected content streams to pass between authenticated devices.
  • Dante Controller SupportedFull setup and control and monitoring of the device is enabled through Dante Controller that delivers standard Dante features such as automatic device discovery and system configuration, making network setup a simple plug and play experience.
  • Always Up To DateFirmware updates, upgrade via Dante Controller IP interface to keep the decoder features and performance up to date.
  • Audio Formats, Dante Audio over IP, AES67 RTPThe D Series decoder supports industry-standard AES67- compatible networked audio streams from encoders and audio interfaces. The received Dante audio streaming or AES67 audio stream can be combined with the video and then output via the HDMI output.
  • Two Ethernet Ports and POEThe D Series decoder includes two RJ-45 1000BASE-T ports can be used to transport video over a Gigabit Ethernet network. Ports 1 for Dante network primary connection and Port 2 can be used to daisy-chain other endpoints. Port 1 is also capable of receiving power.
  • D Series decoder has two models: ■ D10H has HDMI output only, which provides decoded image to output via HDMI 2.0. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
    ■ D20S has HDMI and SDI output, which has SDI video processor built-in to convert Dante AV decoded HDMI to SDI (Up to 12G-SDI) signal for ProAV and broadcast video work flow applications.
  • USB HID and USB OTGUSB control over IP that can be switched and routed alongside the AV signal or separately via a control system allows you to use a USB mouse and/or keyboard to control a remote computer via the Dante network. USB On The Go (OTG) for keyboard and mouse

Illustration

Specifications

Video Codec Optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX
Video Resolutions Up to 4096x2160@60Hz; RGB 4:4:4 @ 8 bit YCbCr 4:4:4 @ 8 bit YCbCr 4:2:2 @ 8/10/12 bit
Color Depth 8-bit, 10-bit, 12-bit
Audio Formats Dante Audio over IP
Bit Rates 200 to 800 Mbps
Copy Protection HDCP 2.2, HDCP 2.3 for network,
Latency 0.5 frame (e.g. 2160p @ 60 Hz latency is < 8 ms between encoder and decoder), Note: Overall latency may increase depending on network configurations
Dante Ecosystem Friendly Instant Dante Ecosystem compatibility with existing Dante-enabled products; Unified control of audio and video using Dante tools - Dante Controller
Format HDMI 2.0: HDCP 2.2, EDID
Supported resolutions 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
Frame rates (Hz) 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Colour space RGB, YCbCr
Component bit width 8-bit, 10-bit, 12-bit
Colour sub-sampling 4:4:4, 4:2:2, 4:2:0
EDID YES, Only with D10H
Available Only D20S
Format 12G-SDI
Supported resolutions 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
Frame rates (Hz) 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Colour space YCbCr
Component bit width 10-bit
Colour sub-sampling 4:2:2, 4:2:0
Standard SMPTE 292(1.5Gb/s), SMPTE 424, SMPTE 425-A(3Gb/s), SMPTE 2081, SMPTE 2082 With SMPTE352 SDI Metadata Supported
Audio transport formats Up to eight channels at 44.1, 48, 88.2 or 96kHz. HDCP sourced audio channels limited to 48kHz. HDMI 7.1 embedded audio.
Bit depths 24, 16 and 32 bits per audio sample
Embedded audio over HDMI output 2 channels from DANTE
Output sample rate 48K and 96K, PCM24(24, 16 and 32 bits)
ETHERNET 1 POE IEEE 802.3ab compliant 1000BASE-T Ethernet port, IEEE 802.3bt Type 3 compliant, PoE++ Class 4 (60W)
ETHERNET 2 IEEE 802.3ab compliant 1000BASE-T Ethernet port
HDMI OUTPUT HDMI Type A connector, female; HDMI digital video/audio output
SDI OUTPUT (D20S) BNC, 75Ω,
USB 1, USB 2 USB Type-A connector, female; USB 2.0 host port; USB signal extender port for connection to a mouse, keyboard; Available Power: 500 mA at 5 VDC.
USB OTG (On The Go) Host computer Mouse (Dante AV transmitter)
Serial Control RJ45, RS-422 compatible with Visca control PTZ camera
IR TX, IR RX 2-pin 3.5 mm, Carrier frequency:38 kHz; Supply voltage: 3.3V to 5V.
LED Indicator Power, Codec, System, Error, Sync, HDCP
Network Interface Standard 1Gbps Ethernet
Audio Channels x8,Flow x15 (unicast or multicast)
Video Flow x1 (unicast or multicast)
Hardware time-stamping, supporting sample-accurate playback
Power Consumption Power input @ 4K60: 38W (D20S); 25W (D10H)
PoE (D10H) PoE+, IEEE 802.3at Type 3 class 5 compliant
PoE (D20S) PoE++, IEEE 802.3bt Type 3 class 5 compliant
Power Adaptor Input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz, Output: 4A @ 12 VDC. 12V DC IN has priority over Ethernet 1 POE. Ethernet 1 POE will become active a fraction of a second after 12V DC IN is disconnected.
Storage Temperature -40 to 100℃
Operating Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% (non-condensing)
Heat Dissipation Cooling fan speed adjustable, 3 Level
Acoustic Noise NC35 or less, variable with cooling fan speed adjustment
Regulatory compliance CE, IC, FCC Part 15 Class B digital device
Body Color Metallic Black
Mounting (Included) HDMI cable secure mount, surface mount for TV display, base mount.
Mounting (Optional) 19 inch single rack mount, 19 inch dual rack mount, Din rail mount
Dimension 216.5x148.35x44mm (LxWxH)
Weight 2.5 lb (1.3 kg)(Net weight)

CompareCompare More Products

Check mark to compare different models or go to Compare Center to have more product comparison.

  • Maximum 4 compare products at once, please reselect.
  • Maximum 4 compare products at once, please reselect.
Compare Now

ResourcesGo to Help & Download Center

Download product Datasheet and User Guide, click Go to Help & Download Center for more product information.

AAAArray ( [cameracontrol] => Array ( ) [faqandhowto] => Array ( ) [functionalityandperformance] => Array ( ) [productimages] => Array ( ) [productinformation] => Array ( [0] => Array ( [id] => 7464 [title] => Dante AV D Series Decoder Product Information [files] => Array ( [0] => Array ( [file_label] => D Series Dante AV Decoder datasheet [file] => https://bolintechnology.com/wp-content/uploads/2021/06/Bolin-DanteAV-Decoder-Datasheet-06212021-2.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [1] => Array ( [file_label] => Dante AV D Series camera and decoder Quick Start guide [file] => https://bolintechnology.com/wp-content/uploads/2021/06/Dante-AV-Camera-and-Decoder-Quick-Start-Guide-06222021.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) ) [product_firmware] => [links] => [videos] => [images] => ) [1] => Array ( [id] => 7982 [title] => D Series Dante AV Decoder Installation Information [files] => Array ( [0] => Array ( [file_label] => D Series Decoder Base and Surface Mount Installation [file] => https://bolintechnology.com/wp-content/uploads/2021/06/D-Series-Decoder-Base-and-Surface-Mount-Installation.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [1] => Array ( [file_label] => B-DR10 Din Rail Mount installation [file] => https://bolintechnology.com/wp-content/uploads/2021/06/B-DR10-Din-Rail-Mount-installation.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [2] => Array ( [file_label] => B-RM10 Single Rack Mount installation [file] => https://bolintechnology.com/wp-content/uploads/2021/06/B-RM10-Single-Rack-Mount-installation.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [3] => Array ( [file_label] => B-RM11 Dual Rack Mount installation [file] => https://bolintechnology.com/wp-content/uploads/2021/06/B-RM11-Dual-Rack-Mount-installation.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [4] => Array ( [file_label] => D Series Decoder D10H Dimension [file] => https://bolintechnology.com/wp-content/uploads/2021/02/D-Series-Decoder-D10H-Dimension.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [5] => Array ( [file_label] => D Series Decoder D20S Dimension [file] => https://bolintechnology.com/wp-content/uploads/2021/02/D-Series-Decoder-D20S-Dimension.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) ) [product_firmware] => [links] => [videos] => [images] => ) [2] => Array ( [id] => 4599 [title] => KBD-1010 PTZ Keyboard Controller Product Information [files] => Array ( [0] => Array ( [file_label] => KBD-1010-RNV-Datasheet [file] => https://bolintechnology.com/wp-content/uploads/2018/04/KBD-1010-RNV-Datasheet-07052020.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [1] => Array ( [file_label] => KBD-1010 RNV-USER MANUAL [file] => https://bolintechnology.com/wp-content/uploads/2019/01/KBD-1010-RNV-USER-MANUAL-02202021.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) [2] => Array ( [file_label] => BOLIN Camera and Keyboard Controller Connection Guide [file] => https://bolintechnology.com/wp-content/uploads/2020/03/BOLIN-Camera-and-Keyboard-Controller-Connection-12292018-2.pdf [file_login] => [editor_login] => [file_show_in_detail] => 1 ) ) [product_firmware] => [links] => [videos] => [images] => ) ) [software] => Array ( [0] => Array ( [id] => 8614 [title] => Firmware Upgrade Not Available [files] => [product_firmware] => [links] => [videos] => [images] => ) ) [videosignalandimage] => Array ( ) )

Order Information

Use Order Information for ordering cameras and accessories.

Item Number SKU Key Spec Note
A101E001 D10H HDMI 2.0 Output Body
A101E002 D20S HDMI 2.0 and 12G-SDI Output Body
L3030029 B-RM11 Dual Rack Mount Kit Accessory, Optional
L3030030 B-RM10 Single Rack Mount Kit Accessory, Optional
L3030031 B-DR10 Din Rail Mount Kit Accessory, Optional
B102E001 BL-PP97 97W High Power POE Power Supply Unit Accessory, Optional
L7030010 VCC-CC8MDP RS232 8-Pin Mini Din to Phoenix Adapter Accessory, Optional
L9190003 VCC-RC-2 IR Remote Controller Accessory, Optional
L9060003 VCC-P12-4 12VDC 4A Power Adapter What's included, X1
L7030005 VCC-CC45RS RS422/232 RJ45 Adapter What's included, X1
L3030032 B-SM10 Surface Mount Kit What's included, X1
L3030033 B-BM10 Base Mount kit What's included, X1
Thank you Card What's included, X1