Images:Download All Images

(912.07 KB)

(771.82 KB)

(937.57 KB)

(974.4 KB)

(1 MB)

(1.04 MB)

(2.45 MB)

(1.04 MB)

PDF Files

PDF Files

PDF Files

Description:

Instructions:

How to use IP Finder to find IP camera information?
1.Download the IPC Search tool from the www.bolintechnology.com
2.Unzip the file and configure your laptop in the same subnet as camera’s, run the IP Search Tool on your laptop/pc, it will automatically get the list of all cameras that located in the same network.
3.You will have the MAC address, IP address, Camera name(Type), Serial number ,Version of the cameras listed.

PDF Files

Product Firmware:

Description:

Instructions:

Upgrading IP Firmware,

If the device is managed by the central management server and you want to upgrade the devices in batch mode, it is recommended to perform the upgrade operation on the central server. For detailed steps, see the user manual for the central management server.

Follow the steps to make the IP FW upgrade:

Login to the camera IP address. Use our IP finder if there is trouble locating the IP address of the camera. Only IE (Internet Explorer) browser is supported.

1. Click Setup near the top middle of the window
2. Click System on the left-hand side
3. Click on Maintenance in the System submenu
4. Under Firmware Upgrade, click Browse and select the correct upgrade file. Download the latest file from bolintechnology.com
5. Select the upgrade button to start the upgrade process.
   (Optional) Select the check box to enable Upgrade Boot Program.
6. Click ok to confirm upgrade one more time. The camera will restart automatically after the upgrade is completed. Please do not reboot the camera or unplug the camera from its power source during the whole updating operation.
7. Feel free to refresh the browser to log back in once the window says “Upgraded Successfully. Please log in.”

NOTE:

• The correct upgrade file must be used for the camera. Otherwise, unexpected results may occur.
• The upgrade file is a ZIP file and must include all the necessary files. Do not unzip this file, the upgrade procedure requires the file to remain in the ZIP file condition.
• The boot program loads the operating system and then the system starts running. The upgrade boot program function is disabled by default, and only the camera will be upgraded to the latest version. If enabled, both the camera and the boot program are upgraded, and the operating system of the following new versions can be booted properly, and the camera can be upgraded conveniently.
• Ensure that the power supply is normal during upgrade. The device will restart after the upgrade is completed.

Product Firmware: