Download Center

4066
  • Series

  • Model

Download

Product Images

Product Information

Software

Keywords:
There are results
AAA

General knowledge of terminologies that are relevant to our products and technologies based on industry standards.
Login may be required.
A library of knowledge base for control between camera and keyboard controller and integration system.

Series:Box Series
Model Number:BL-VNS-1

No Results Found

Learn all answers to the important Questions Frequently Asked by users.
UNDER CONSTRUCTION

Series:Box Series
Model Number:BL-VNS-1

No Results Found

Explore our product features, functionalities, data or specs before you make a purchase, or find out guidance of how our products works.

Series:Box Series
Model Number:BL-VNS-1

No Results Found

Download high resolution images for purpose of literature, online content, marketing or system design use.
Login may be required.

Series:Box Series
Model Number:BL-VNS-1

No Results Found

Download all the product information, i.e. User Guides, Datasheets, Drawings, Dimensions, Info with page link, Video Clips and more for the respective model you select.
Login may be required.

Series:Box Series
Model Number:BL-VNS-1

Visca Over IP To Serial Control Converter Product Information

BC-9 Series 1 inch CMOS 4K PTZ Camera Product Information

KBD-1010 PTZ Keyboard Controller Product Information

Download the latest firmware or software to keep your product up to date in terms of performance and reliability.
Login may be required.

Series:Box Series
Model Number:BL-VNS-1

Visca Over IP To Serial Control Converter IP Firmware

copiedCopy Link
Description:

Instructions:

Follow the steps to make the IP FW upgrade:
1.Connect and configure your camera with your local network successfully.
2.Log in to the camera IP web interface
3.Go to System, Maintenance section to upgrade the firmware.
4.How to login to the camera IP web interface and how to make the firmware upgrade, please refer to User Manual.

Internet Explorer 11 browser  is the only browser supported.

The camera IP interface URL must be added to the Internet Explorer 11 browser’s Trusted Sites before to start IP  firmware upgrade, otherwise, you will be prompted that the firmware file cannot be opened.

A. Add camera IP interface URL to Trusted Sites
1. Click browser’s Tools button (alt+X),  select the internet option;
2. Access to Security page, there has Trusted Sites option, click Sites button and add this website to the zone;
3. Please make sure the “Require server verification (https:)for all sites in this zone” option box is unchecked.
4. After done, close the setting menu, and now you are ready for upgrade.

B. FW Upgrade
1. Login camera IP interface, access to System Settings > Maintenance page;
2. Click “Browse…” button, select the IP firmware file, and click Remote Update button.
3. The firmware upgrade including two steps:
1) Upload the firmware file to the camera IP module, it will display a percentage progress bar to indicate the upload status on the page.
2) Firmware burning and updating, there will be a new progress bar, the burning and updating process takes about 3 to 5 minutes. Please do not power off or reboot the camera during the whole upgrading process, until the page prompt “Upgrade is successful…”
4. Once the upgrade is successful, the page will prompt “Upgrade is successful. Are you sure you want to restart the device now?”, please click OK button to reboot the camera.
5. The camera should reboot by itself and re-initiate. If the device does not do so within 2 minutes after clicking OK on the Upgrade successful prompt, please manually power cycle the camera.

 

 

NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with this process


Product Firmware:

Visca Over IP To Serial Control Converter MCU Firmware

copiedCopy Link
Description:

Instructions:

Follow the steps to make the FW upgrade:

1.Prepare a USB flash drive (Formatted as FAT32)
2.Download the latest version firmware from website
3.Load the xxx.bin file onto the flash drive, and must rename the file “HD20.bin”
4.With the camera powered off, insert the flash drive to the USB port on the back panel of the device.
5.Apply power to the device.
6.Wait for more than 30 seconds, the firmware will be uploaded to the device. 
7.Check the FW version data via IP web interface.

NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with this process


Product Firmware:

General knowledge of terminologies that are relevant to our products and technologies based on industry standards. Login may be required. Explore and understand image parameter settings for gaining quality of the image based on the camera.

Series:Box Series
Model Number:BL-VNS-1

No Results Found