Learning & Download Center

4066
  • Series

  • Model

Download

Learning

General Information

Product Images

Product Information

Software

FAQ and How To

Functionality and Performance

Camera Control

Video Signal And Image

Keywords:
There are results
AAA

General knowledge of terminologies that are relevant to our products and technologies based on industry standards.
Login may be required.
A library of knowledge base for control between camera and keyboard controller and integration system.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

Under Construction, Coming Soon……

copiedCopy Link
Description:

Learn all answers to the important Questions Frequently Asked by users.
UNDER CONSTRUCTION

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

No Results Found

Explore our product features, functionalities, data or specs before you make a purchase, or find out guidance of how our products works.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

No Results Found

Download high resolution images for purpose of literature, online content, marketing or system design use.
Login may be required.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

BC-9 Series 1 inch CMOS 4K PTZ Camera Images – Black

copiedCopy Link
Images:Download All Images

(1.51 MB)

(1.46 MB)

(1.46 MB)

(1.97 MB)

(1.72 MB)

(1.28 MB)

(1.46 MB)

(1.48 MB)

(1.35 MB)

(1.44 MB)

(1.39 MB)


BC-9 Series 1 inch CMOS 4K PTZ Camera Images – White

copiedCopy Link
Images:Download All Images

(1.81 MB)

(2.02 MB)

(2.03 MB)

(1.76 MB)

(1.8 MB)

(1.59 MB)

(2.12 MB)

(1.35 MB)


BC-9 Series 1 inch CMOS 4K PTZ Camera Images – Accessory

copiedCopy Link
Images:Download All Images

BC-9-VC-OS6, Optical 6G-SDI Card (120.3 KB)

Insert optical 6G-SDI Card (150.92 KB)

Camera with optical SDI card (125.39 KB)

BC-9-VC-B, HDBaseT Card (121.98 KB)

Insert HDBaseT Card (146.67 KB)

Camera with HDBaseT Card (132.43 KB)


Download all the product information, i.e. User Guides, Datasheets, Drawings, Dimensions, Info with page link, Video Clips and more for the respective model you select.
Login may be required.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

BC-9 Series 1 inch CMOS 4K PTZ Camera Product Information

BC-9 Series 4K PTZ Camera Installation Information

KBD-1010 PTZ Keyboard Controller Product Information

HDBaseT Receiver Product Information

High Power 97W POE Injector Product Information

Download the latest firmware or software to keep your product up to date in terms of performance and reliability.
Login may be required.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

Tool-Camera IP Finder – N2

copiedCopy Link
Description:

Instructions:

How to use IP Finder to find IP camera information?
1.Download the IPC Search tool from the www.bolintechnology.com
2.Unzip the file and configure your laptop in the same subnet as camera’s, run the IP Finder Tool on your laptop/pc, it will automatically get the list of all cameras that located in the same network.
3.You will have the MAC address, IP address, Camera name, Camera model, Serial number of the cameras listed.


PDF Files

Product Firmware:

BC Series 4K PTZ Camera FW Upgrade – FPGA

copiedCopy Link
Description:

Instructions:

Follow the steps to make the FPGA FW upgrade:
1.FPGA FW upgrade can be made via IP network.
2.Connect and configure your camera with your local network successfully.
3.Log in to the camera IP web interface
4.Go to System, Maintenance section to upgrade the firmware.
5.It takes about 3-5 minutes to complete the upgrade process.
6.How to login to the camera IP web interface and how to make the firmware upgrade, please refer to User Manual Part Two.

Internet Explorer 11 browser  is the only browser supported.

The camera IP interface URL must be added to the Internet Explorer 11 browser’s Trusted Sites before to start IP & FPGA firmware upgrade, otherwise, you will be prompted that the firmware file cannot be opened.

A. Add camera IP interface URL to Trusted Sites
1. Click browser’s Tools button (alt+X), select the internet option
2. Access to Security page, there has Trusted Sites option, click Sites button and add this website to the zone
3. Please do not check the “Require server verification (https:) for all sites in this zone” option box
4. After done, close the setting menu, and now you are ready for upgrade.

B. FW Upgrade
1. Login camera IP interface, access to System Settings>Maintenance page
2. Click “Browse…” button, select the FPGA firmware file, and click Remote Update button
3. The firmware upgrade including two steps:
1) Upload the firmware file to the camera IP module, it will display a percentage progress bar to indicate the upload status on the page
2) Firmware burning and updating, there is no progress bar prompt in this step, the burning and updating process takes about 3-6 minutes.
4. Once the upgrade is successful, the page will prompt “The program has been upgraded, please power cycle the camera to activate the new software.” please click OK and then power cycle the camera for the upgrade to take effect.
5. Please do not power off or reboot the camera during the whole upgrading process, until after clicking OK on the page prompt “The program has been upgraded”.

 

 

NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with this process


Product Firmware:

BC-9 Series 1 inch CMOS 4K PTZ Camera FW Upgrade – MCU

copiedCopy Link
Description:

Instructions:

Follow the steps to make the FW upgrade:

1.Prepare a USB flash drive (Formatted as FAT32)
2.Download the latest version firmware from website
3.Load the xxx.bin file onto the flash drive, and must rename the file “HD20.bin”
4.With the camera powered off, insert the flash drive to the USB port on the back panel of the camera.
5.Apply power to the camera.
6.The green indicator light beneath the lens will turn yellow for a few seconds while the upgrade takes place. Once the upgrade is finished, the light will turn green, and the camera will proceed through a normal boot cycle.
7.Check the FW version data on the OSD boot screen.

NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with this process


Product Firmware:

BC/VCC Series 4K PTZ Camera FW Upgrade – IP

copiedCopy Link
Description:

Instructions:

Follow the steps to make the IP FW upgrade:
1.Connect and configure your camera with your local network successfully.
2.Log in to the camera IP web interface
3.Go to System, Maintenance section to upgrade the firmware.
4.How to login to the camera IP web interface and how to make the firmware upgrade, please refer to User Manual Part Two.

FW Upgrade
1. Login camera IP interface, access to System Settings > Maintenance page;
2. Click “Browse…” button, select the IP firmware file, and click Remote Update button.
3. The firmware upgrade including two steps:
1) Upload the firmware file to the camera IP module, it will display a percentage progress bar to indicate the upload status on the page.
2) Firmware burning and updating, there will be a new progress bar, the burning and updating process takes about 3 to 5 minutes. Please do not power off or reboot the camera during the whole upgrading process, until the page prompt “Upgrade is successful…”
4. Once the upgrade is successful, the page will prompt “Upgrade is successful. Are you sure you want to restart the device now?” please click OK button to reboot the camera.
5. The camera should reboot by itself and re-initiate. If the device does not do so within 2 minutes after clicking OK on the Upgrade successful prompt, please manually power cycle the camera.

NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with this process


Product Firmware:

General knowledge of terminologies that are relevant to our products and technologies based on industry standards. Login may be required. Explore and understand image parameter settings for gaining quality of the image based on the camera.

Series:9 Series 4K PTZ Camera
Model Number:BC-9-4K12S-S6MN

Under Construction, Coming Soon……

copiedCopy Link
Description: